| Wires and cables all around in your room gives a | | | | the length of the fish stick, you can screw one or |
| messy look. Exposed wires and cables are also | | | | two more fish sticks together. |
| very dangerous. Wires and cables going here and | | | | 4. Now put the fish stick along with wire |
| there can be risky in a way that you can trip on | | | | under the carpet and push it in the way from |
| them or yank them or might have step on them, | | | | where you want the wire to come out. You can |
| this can not only raise the potential risks for you | | | | move and change the direction of the fish stick |
| but wires can also receive damage in this case. In | | | | as required. Do it gently. Never show any urgency |
| order to ensure your safety and to prevent any | | | | while pushing the fish stick. |
| damage to your wires, keep your wires out of | | | | 5. Now move to other end of the carpet and |
| the way. The best way to hide your wires and | | | | pull the edge of the carpet up with pliers. |
| cables is to bury them under the carpet. | | | | 6. After removing the edge of the carpet, |
| Required Items | | | | hold the fish stick end with pliers and pull it |
| You need following items to perform this duty: | | | | towards yourself. Pull it out from under the carpet |
| - Tape measure | | | | completely. |
| - Pliers | | | | 7. Once the wire and fish stick is out from |
| - Utility knife | | | | other end, take the tape off holding the wire and |
| - Fish sticks | | | | fish stick together. |
| - Electrical tape | | | | 8. Plug the wire with the component. Replace |
| Steps | | | | the carpet to its place properly. You are done |
| 1. The first thing you have to select the | | | | with your task. |
| place where you want to adjust the components. | | | | Precautions |
| Also find out which way you want wires to run. | | | | - Metal coat hangers are much better option |
| Measure the distance and get a proper length | | | | than fish sticks. If they are available use them |
| wire. | | | | instead of fish sticks. It is better to use flat cables |
| 2. Next step is to make the carpet loose | | | | under the carpet instead of standard ones. Flat |
| from its tack strips; this will allow an easy | | | | cables adjust easily under the carpet. |
| passage to wires. Pull the edge of the carpet up | | | | - Never use high voltage cables or wires |
| with pliers to let it get free from tack strips. | | | | under the carpet. Using high voltage cables or |
| Remember not to pull large part of carpet. | | | | wires under the carpet increases the possibility of |
| 3. Now you need fish stick, electrical tape | | | | catching fire risk. |
| and a utility knife. Using utility knife cut a small | | | | - Utility knife is harmful, if used casually, it |
| piece of tape. Now keep wire on the end of the | | | | has very sharp blade so take extra care while |
| fish stick and apply tape onto them. To adjust | | | | using it. |